Resources – Getting Started & Next Steps

What Is Data Center Lift?

Installing some heavy IT equipment pose huge amount of risks to valuable employees especially if it’s done manually. This is the main reason to why it is such a great decision to use data center lift for doing all the move. But just before you buy any server lift, there are few points that you must be aware of and this is what will be discussed in the next lines.

Number 1. The device should be purpose built for data centers – as a matter of fact, there are 2 aspects that should be considered when it comes to this issue, one comes with the potential for policy or code violations and two pertains to suitability of server lifting device. Common errors is buying a server lift device that is primarily designed for general purpose or to warehouse applications. Oftentimes, they’re not maneuverable easily in data center aisle, don’t have the mechanism to extend into rack for easy and safe installation and have inadequate braking system.

If ever the lift device is using hydraulic oil or fluids in any of the said mechanisms, then it might be violating data center policy. These codes and policies as well should be followed strictly as it’s intended to protect the equipment and people.
5 Uses For Lifts

Number 2. Lift system should be able to insert equipment into racks – most of the general purpose lift system can lift equipment to the desired height but it is not able to hold it in place into rack while it’s fastened in position. Being able to install heavy equipment with gap underneath requires technicians to be able to firmly hold the device.
Equipment Tips for The Average Joe

The lift system that could hold the equipment intact in rack while it is fastened is the only way to allow single technician to install heavy equipment safely without asking for help.

Number 3. Do not risk radio frequency interference – all of the IT equipment such as switches, servers as well as power supplies are governed by the regulations for Radio Frequency Interference or simply as RFI. The RFI signals may be caused by wide varieties of electrical devices and the most common source is coming from powerful magnetic field that’s generated when stopping or starting electric motors. Magnetic surge near the communication equipment can result to data interference and in more extreme cases, can damage the equipment.

In an effort to eliminate RFI damage, it is recommended to have a hand operated device. For staffs to operate with less hassle, one with high ratio gearing should be used. In addition to that, the data center lift device should be rated in order to accept the weight of switches, power supplies, batteries and servers your company used today.